Oneway Talon Chuck System | Woodworking Store

Power-grip, key-operated chuck is perfect for lathes with a 16" swing or less! Features single-hand key operation, patented over-extension safety system, 4-jaw scroll chuck and smooth-glide base jaw design. Chuck has 3-1/2" body diameter and standard #2 jaws. With nickel-plated body and hardened base jaws. Over-extension safety system prevents the base jaws from coming loose during operation. Base jaw slide design allows 50% more contact area, adding to longer life and easier chuck operation. Weighs 3.4 lbs.

#1 Jaws (Step Jaws) -No. 1 Jaws are useful for turning small bowls, knobs, vases or spindles.
	Min	Max
External Chucking	3/8"	1"
Internal Chucking	1-7/8"	2-1/2"
#3 Jaws -These Jaws have the mass and size so necessary for those turners producing large bowls and vases. They are unparalleled in strength and holding capacity. Notice that the #3 jaws have also been outfitted with our patented profiled jaw design.
	Min	Max
External Chucking	3-1/8"	3-3/4"
Internal Chucking	4-1/2"	5-1/4"
Mini Jumbo Jaws -Now available are jumbo jaws in a mini size of 8 1/2" diameter. Because of their small diameter, they can be used on various smaller sized lathes.
	Min	Max
External Chucking	2-7/8"	4-7/8"
Internal Chucking	8-1/2"	9-1/2"
Jumbo Jaws -These jaws are aluminum plates, machined from the solid for higher strength which measure 11" in diameter. Their unique combination of slots and tapped holes for mounting the rubber grippers allows holding an infinite number of round, oval or square shapes. Buttons are hard rubber pressed over a tapered steel sleeve for superior holding.3 These jaws can be used for light finishing on the backs of bowls as well as for external chucking on platters and picture frames. By using an extra button set, it is possible to stack buttons which further accommodates odd shapes. Wooden false jaws may be mounted and turned for those requiring the utmost in precision finishing or for extremely large or critical applications.
	Min	Max
External Chucking	2-7/8"	4-7/8"
Internal Chucking	11"	12"

Compatibility
The jaws of the TALON Chuck are compatible with the jaws of the original ONEWAY scroll chuck. Because of it's smaller body diameter, if you use ONEWAY Scroll Chuck Jaws, there will be some areas where capacity overlap between jaw sets will not occur.

Woodworking Store | Woodworking Store Sitemap